Products
-
ARM Chips
Economical ARM Cortex M0+ chips for your projects ! The LPC810 is an entry-level 32bit ARM Cortex M0+ architecture chip from NXP. The 8 pin, Dual In-line Package (DIP) is ideal for breadboarding and easy to solder PCB...€4.50 - €13.00
-
Bare ARM Blinker
A solderless pathway for exploring the ARM Cortex M0+ ! The Bare ARM Blinker is an entry-level introduction to building neat functions using the 32bit ARM Cortex M0+ chip architecture. Designed as a solderless starter kit for less experienced...€9.50 - €23.50
-
Battery holder
This lets you use JeeNodes with batteries. Either the 3- or 4-cell unit is fine, the 4-cell provides higher voltage/more mAh capacity. Depending on whether – and how well – sleep mode is implemented in...€3.00 - €4.00
-
Bridge Board
The Bridge Board v2 is an add-on which makes it very convenient to use a JeeNode (or a JeeNode USB, or a SMD Kit) alongside a solder-less breadboard, by bringing all pins out to the...€5.50 - €9.00
-
Carrier Board (v2)
The Carrier Board is a re-wiring option which sits between a JeeNode and its plugs. It has exactly the right size to fit snugly in a compact ABS plastic box, made from two identical, standard depth half-shells...€4.50 - €12.00
-
Carrier Card
The Carrier Card is an add-on for use with the Carrier Board, via which it connects to up to 19 I/O pins on a JeeNode or SMD Kit. The entire inner area is perforated with...€4.50 - €18.00
-
Coin Cells
Power your Real Time Clocks JeeNode Micro JeeNode Zero etc. with these branded Lithium - Manganese Dioxide 3V coin sized batteries. They are low self-discharge, intended for a light average current draw, achieving a shelf life of several years....€2.50 - €4.00
-
Extension cables
These 6-wire extension cables were custom-made to make it easier to hook up plugs to ports (and to each other). The color codes were chosen to match the port header pinouts: PWR = RED DIO...€7.50
-
Flash Board
The Flash Board is a small PCB which sits on top of a JeeNode or SMD Kit, turning it into an ISP programmer for ATmega and ATtiny chips. The board includes an 128 Kbyte EEPROM,...€3.00 - €14.00
-
Garage Parking Aid
More from the Bare ARM series of solderless projects - the Garage Parking Aid. This kit tracks the Garage Parking Aid ARM Cortex M0+ project documented in the JeeLabs weblog. The Full GPA Kit contains all the parts needed to...€19.50 - €33.50
-
JeePlug Pack
The JeePlug is a tiny board which can be used for prototyping and to “re-wire” connections between various headers and cables. There are 8 × 10 plated-through holes and pads, all the pads on the...€9.00 - €9.50
-
Large breadboard
These large solder-less breadboards make it easy to try out things hooked up to a JeeNode, and to build up elaborate electrical circuits with many components and ICs, particularly in combination with Wire jumpers. The...€7.50
-
Mini breadboard
These mini breadboards make it easy to try out things hooked up to a JeeNode, particularly in combination with Wire jumpers. The boards have a self-adhesive backing and 2x 17 rows of interconnected pins (5...€4.00
-
Plug Headers
The Plug Headers set contains ten 6-pin female 0.1" pin headers and ten 6-pin male 0.1" pin headers. These headers are used everywhere by JeeNodes and Plugs, as well as for the FTDI and PWR/SER/I2C connectors....€6.00
-
Proto Board
The Proto Board is a small add-on board which fits over all the connectors of a JeeNode (except the FTDI connector). The two “ends” of the board are slightly different to help identify the proper...€3.50 - €30.00
-
RBBB Combo Pack
This package combines the USB BUB-II, with the popular Really Bare Bones Board (RBBB). Now you can upload sketches from your programming environment directly into the AtMega chip's EEPROM and provide it power from a USB port....€29.50
-
RBBB Combo Pack III
This package combines the USB BUB-III, with the popular Really Bare Bones Board (RBBB). Now you can upload sketches from your programming environment directly into the AtMega chip's EEPROM and provide it power from a USB port....€27.50
-
Right-Angled Plug Headers
This Plug Headers set contains ten 6-pin female 0.1" pin headers and ten 6-pin male 0.1" pin headers with the shorter legs conveniently pre-formed into a 90 degree bend. These headers are used everywhere by...€6.50
-
Stacking Headers
These stacking headers let you extend a board on top of existing headers, while allowing a next level to "stack" on top. Perfect for JeeNode ports (6-pin) and for the PSIX header (8-pin). They are...€6.00 - €6.50
-
Utility Plug
The Utility Plug is a small board to interface any of the ports on a JeeNode to an RJ-12 jack. The kit includes the following extra components, to handle a variety of simple interfacing and...€3.50 - €14.00
-
Wire Jumpers
These jumper cables are great for quick prototyping, especially in combination with the Mini breadboard. The cables are flexible, with a convenient little grip and solid cores on both ends. A bundle contains over 50...€6.00
