Skip to navigation.


Products

  • JeeLink (v3c)

    No more waiting!  The new batch has cleared QA ready for immediate shipment. The JeeLink is a fully assembled and ready-to-use USB-type “stick” which plugs directly into a PC, Mac or USB hub. It contains Atmel’s ATmega328p...

    €27.50 - €32.50

  • JeeLink Classic

    The JeeLink is a fully assembled and ready-to-use USB-type “stick” which plugs directly into a PC, Mac or USB hub. It contains Atmel’s ATmega328p AVR microprocessor, HopeRF’s RFM12B wireless radio module and a branded FT232R USB interface chip. The...

    €27.50 - €32.50

  • JeeNode Micro

    The JeeNode Micro (v3) is the skinny younger brother of the JeeNode - 15 x 47 mm, and just 3.5 mm tall, from using a thin PCB and an extra-flat wireless module. The two ports (not four) of the...

    €3.50 - €119.50

  • JeeNode SMD (v1)

    This is a JeeNode built with SMD parts. It contains Atmel’s ATmega328p AVR microcontroller and HopeRF’s RFM12B 868 MHz wireless radio module, and pins to connect to an USB BUB or other FTDI interface. The...

    €4.50 - €199.00

  • JeeNode USB

    The JeeNode USB is complete with a built-in USB interface so it’s a great way to get started with JeeNodes. If you just want to prove out a concept, plug in a JeeNode USB –...

    €3.00 - €159.00

  • JeeNode Zero

    Go Wireless with the new JeeNode Zero - an ARM M0⁺ based board with fully integrated radio opens up great new projects. These compact units have Mecrisp Forth and radio module drivers pre-installed - just connect up and...

    €14.00 - €49.50

  • JeeNode(v6)

    Go Wireless with the JeeNode - a compact, Atmel chip board with integrated radio opens up great new projects. Compatible with the Arduino platform you can  program under Windows, MacOS, or Linux using sketches created with the Arduino IDE....

    €5.00 - €159.00

  • LED Node (v2a)

    The popular LED Node gives full spectrum control of 12-24V RGB LED strips over wireless ! The LED Node v2 combines a JeeNode with powerful MOSFET switches - its narrow (18 x 132 mm) form factor is a good in-line fit...

    €4.50 - €27.50

  • RBBB

    The Really Bare Bones Board (RBBB) is a mini board designed for those experimental applications that require small processors, such as wearable computing, prototyping, artist’s projects or any use for a low-cost, well-supported microcontroller. As...

    €1.50 - €14.50

  • RBBB Combo Pack

    This package combines the USB BUB-II, with the popular Really Bare Bones Board (RBBB). Now you can upload sketches from your programming environment directly into the AtMega chip's EEPROM and provide it power from a USB port....

    €29.50

  • RBBB Pro

    The Really Bare Bones Board (RBBB) is a mini board designed for those experimental applications that require small processors, such as wearable computing, near space experiments, toy prototyping, artist’s projects or any use for a...

    €18.00

  • SMD Kit (v1)

    The SMD Kit is a tiny board with the ATmega328p microprocessor. It is compatible with the Arduino platform and can be programmed under Windows, Mac OS X, or Linux using sketches created with the Arduino IDE. The...

    €3.00 - €12.00

  • Wireless Starter Pack

    This JeeLabs Wireless Starter Pack has everything you need to get started with your own 3-node Wireless Sensor Network. Two nodes are pre-assembled and pre-loaded with demo software so you can be up and running...

    €169.50