JeeLabs
-
Analog Plug
The Analog Plug is a small board containing the MCP3424 analog-to-digital converter with I2C bus interface. The ADC can take 4…240 samples per second, depending on resolution (12..18 bits). It has 4 differential input channels and supports...€3.00 - €13.00
-
Bare ARM Blinker
A solderless pathway for exploring the ARM Cortex M0+ ! The Bare ARM Blinker is an entry-level introduction to building neat functions using the 32bit ARM Cortex M0+ chip architecture. Designed as a solderless starter kit for less experienced...€9.50 - €23.50
-
Blink Plug
The Blink Plug is a small board with room for two LEDs and two push buttons. A simple software trick can be used to interface to both switches and LEDs using only two I/O pins....€3.00 - €4.50
-
Carrier Board (v2)
The Carrier Board is a re-wiring option which sits between a JeeNode and its plugs. It has exactly the right size to fit snugly in a compact ABS plastic box, made from two identical, standard depth half-shells...€4.50 - €12.00
-
Color Measuring Plug
The Color Plug is a small board containing the TAOS TCS3414 digital light color sensor. This chip measures the color chromaticity and illuminance of ambient light with up to 16-bits of resolution. An array of 16 tiny photodiodes...€3.00 - €18.50
-
Dimmer Plug
The Dimmer Plug is a small board containing the PCA9635 16-channel PWM LED driver. This driver communicates directly over I2C. There is a “DimmerPlug” class in the JeeLib library to interface with this driver, to...€2.50 - €12.00
-
Expander Plug
The Expander Plug is a small board with 8 general-purpose digital I/O lines. Each of the lines can be configured individually as input (with optional 100 kΩ pull-ups) or as output. The 2×6-pin connection carries...€2.50 - €6.50
-
Extension cables
These 6-wire extension cables were custom-made to make it easier to hook up plugs to ports (and to each other). The color codes were chosen to match the port header pinouts: PWR = RED DIO...€7.50
-
Flash Board
The Flash Board is a small PCB which sits on top of a JeeNode or SMD Kit, turning it into an ISP programmer for ATmega and ATtiny chips. The board includes an 128 Kbyte EEPROM,...€3.00 - €14.00
-
Garage Parking Aid
More from the Bare ARM series of solderless projects - the Garage Parking Aid. This kit tracks the Garage Parking Aid ARM Cortex M0+ project documented in the JeeLabs weblog. The Full GPA Kit contains all the parts needed to...€19.50 - €33.50
-
Gravity (accelerometer) Plug
The g Plug (or Gravity Plug) is a small board containing a MEMS-based 3-axis accelerometer sensor from Bosch Sensortec. With a high (10 bits) resolution and an adjustable ±2/±4/±8g range (i.e. up to 64 LSB/g),...€2.50 - €18.00
-
Input Plug
Due to high demand from the Summer Sale this item is now out of stock. If you order now, you will join a FIFO queue for the next batch expected mid-November. The Input Plug is...€2.50 - €12.00
-
JeeLink (v3c)
No more waiting! The new batch has cleared QA ready for immediate shipment. The JeeLink is a fully assembled and ready-to-use USB-type “stick” which plugs directly into a PC, Mac or USB hub. It contains Atmel’s ATmega328p...€27.50 - €32.50
-
JeeLink Classic
The JeeLink is a fully assembled and ready-to-use USB-type “stick” which plugs directly into a PC, Mac or USB hub. It contains Atmel’s ATmega328p AVR microprocessor, HopeRF’s RFM12B wireless radio module and a branded FT232R USB interface chip. The...€27.50 - €32.50
-
JeeNode Micro
The JeeNode Micro (v3) is the skinny younger brother of the JeeNode - 15 x 47 mm, and just 3.5 mm tall, from using a thin PCB and an extra-flat wireless module. The two ports (not four) of the...€3.50 - €119.50
-
JeeNode SMD (v1)
This is a JeeNode built with SMD parts. It contains Atmel’s ATmega328p AVR microcontroller and HopeRF’s RFM12B 868 MHz wireless radio module, and pins to connect to an USB BUB or other FTDI interface. The...€4.50 - €199.00
-
JeeNode USB
The JeeNode USB is complete with a built-in USB interface so it’s a great way to get started with JeeNodes. If you just want to prove out a concept, plug in a JeeNode USB –...€3.00 - €159.00
-
Large breadboard
These large solder-less breadboards make it easy to try out things hooked up to a JeeNode, and to build up elaborate electrical circuits with many components and ICs, particularly in combination with Wire jumpers. The...€7.50
-
LCD Plug
The LCD Plug is a small board containing an MCP23008 I/O expander which connects to most common 16-pin character LCD displays that use the HD44780 standard. The backlight can be turned off for greatly reduced...€3.50 - €25.50
-
Lux Plug
The Lux Plug is a small board containing the TSL2561 light intensity sensor. This tiny sensor communicates directly over I2C. There is a “LuxPlug” class in the JeeLib library to interface with this sensor and...€2.50 - €11.00
-
Memory Plug
The Memory Plug is a small board with 1 to 4 EEPROM memory chips. With M24M01’s from STMicroelectronics, the board can have up to 512 Kbyte of memory (4x 1 Mbit). An I2C bus running...€2.50 - €17.00
-
Mini breadboard
These mini breadboards make it easy to try out things hooked up to a JeeNode, particularly in combination with Wire jumpers. The boards have a self-adhesive backing and 2x 17 rows of interconnected pins (5...€4.00
-
Output Plug
The Output Plug is a small board containing an 8-bit I/O expander plus NPN darlington array. Each pin can sink up to 500 mA @ 50V. Clamping diodes are included, so that relays and small...€2.50 - €8.50
-
Plug Headers
The Plug Headers set contains ten 6-pin female 0.1" pin headers and ten 6-pin male 0.1" pin headers. These headers are used everywhere by JeeNodes and Plugs, as well as for the FTDI and PWR/SER/I2C connectors....€6.00
-
Plug Shield
The Plug Shield allows using I2C-based JeePlugs with any Arduino or compatible clone. It acts as interface between the hardware I2C port and the plugs. There is a level converter on board, as well as...€4.50 - €14.50
-
Precision RTC Plug
The Precision RTC Plug is a small (21x35mm) board containing a low power real-time clock with battery backup. It continues to track the time with second by second resolution while the attached node is sleeping or...€3.50 - €14.00
-
Pressure Plug
The Pressure Plug is a small board containing the BMP085 barometric pressure and temperature sensor. This tiny sensor communicates directly over I2C. Some processing is required to arrive at properly adjusted readings, this is available...€2.50 - €18.00
-
Project Boxes
These are sturdy, general purpose ABS plastic boxes. The clam-shell halves of the box match and mate together with a secure click. For flexibility, there are two stock shell sizes and either size may be used to form boxes...€4.00 - €5.00
-
Proto Board
The Proto Board is a small add-on board which fits over all the connectors of a JeeNode (except the FTDI connector). The two “ends” of the board are slightly different to help identify the proper...€3.50 - €30.00
-
RFM12B Board
The RFM12B Board is a compact breakout board for HopeRF's RFM12B radio module, as featured on all JeeNodes and JeeLinks. If you are looking for an affordable way to add wireless communication to your Arduino...€3.50 - €62.50
-
RFM69CW Board
Here's a neat HopeRF RFM69CW radio module breakout board. An affordable choice to add modern wireless capability to your Arduino (original or compatible). Supporting both 5V and 3.3V power, this matches a whole range of Arduino...€3.50 - €115.00
-
Right-Angled Plug Headers
This Plug Headers set contains ten 6-pin female 0.1" pin headers and ten 6-pin male 0.1" pin headers with the shorter legs conveniently pre-formed into a 90 degree bend. These headers are used everywhere by...€6.50
-
Room Board
The Room Board is a small board with sensors for indoor monitoring of several environmental parameters: temperature – via either an HYT131 or a DS18B20 humidity – via the same HYT131 sensor motion – via...€1.50 - €39.00
-
RTC Plug
The RTC Plug is a small board containing a low power real-time clock with battery backup. It continues to track the time with second by second resolution while the attached node is sleeping (or even powered...€2.50 - €8.50
-
SMD Kit (v1)
The SMD Kit is a tiny board with the ATmega328p microprocessor. It is compatible with the Arduino platform and can be programmed under Windows, Mac OS X, or Linux using sketches created with the Arduino IDE. The...€3.00 - €12.00
-
Special Request
This is not a product, but a way to pay for something which is not directly available in the shop. It can also be merged with an existing order to make changes or upgrades. Please...€1.00 - €7.50
-
Special Shipment
This is not a product, but a way to pay for upgrading the method of shipping your order. It can be used for Courier Services, Extra Insurance, Special Delivery Instructions etc. Please get in touch...€1.00 - €12.50
-
Thermo Plug
The Thermo Plug is a small, versatile board with room for one of three types of temperature sensors, and either a buzzer or a transistor driver for a modest load such as relay, small motor,...€3.50 - €39.00
-
UART Plug
The UART Plug contains a hardware serial port with 64-byte buffers for both send and receive. It can support baudrates up to 115200 baud, if the connecting bus can handle this bandwidth. An I2C bus...€2.50 - €11.00