Jeeplugs
-
RFM12B Board
The RFM12B Board is a compact breakout board for HopeRF's RFM12B radio module, as featured on all JeeNodes and JeeLinks. If you are looking for an affordable way to add wireless communication to your Arduino...€3.50 - €62.50
-
Room Board
The Room Board is a small board with sensors for indoor monitoring of several environmental parameters: temperature – via either an HYT131 or a DS18B20 humidity – via the same HYT131 sensor motion – via...€1.50 - €39.00
-
Pressure Plug
The Pressure Plug is a small board containing the BMP085 barometric pressure and temperature sensor. This tiny sensor communicates directly over I2C. Some processing is required to arrive at properly adjusted readings, this is available...€2.50 - €18.00
-
RTC Plug
The RTC Plug is a small board containing a low power real-time clock with battery backup. It continues to track the time with second by second resolution while the attached node is sleeping (or even powered...€2.50 - €8.50
-
Infrared Plug
The Infrared Plug is a small board which can send and receive modulated infrared signals, as commonly used by many remote controls and appliances around the house. The board uses a CMOS 555-timer chip to...€2.50 - €12.50
-
Lux Plug
The Lux Plug is a small board containing the TSL2561 light intensity sensor. This tiny sensor communicates directly over I2C. There is a “LuxPlug” class in the JeeLib library to interface with this sensor and...€2.50 - €11.00
-
Gravity (accelerometer) Plug
The g Plug (or Gravity Plug) is a small board containing a MEMS-based 3-axis accelerometer sensor from Bosch Sensortec. With a high (10 bits) resolution and an adjustable ±2/±4/±8g range (i.e. up to 64 LSB/g),...€2.50 - €18.00
-
Thermo Plug
The Thermo Plug is a small, versatile board with room for one of three types of temperature sensors, and either a buzzer or a transistor driver for a modest load such as relay, small motor,...€3.50 - €39.00
-
RFM69CW Board
Here's a neat HopeRF RFM69CW radio module breakout board. An affordable choice to add modern wireless capability to your Arduino (original or compatible). Supporting both 5V and 3.3V power, this matches a whole range of Arduino...€3.50 - €115.00
-
Compass Board
The Compass Board is a small board containing the HMC5883 3-axis compass module by Honewell. The chip can be configured to 8 different sensitivities, from 0.9 to 8 Gauss full-scale, with read-outs up to 160 times...€12.50
-
Color Measuring Plug
The Color Plug is a small board containing the TAOS TCS3414 digital light color sensor. This chip measures the color chromaticity and illuminance of ambient light with up to 16-bits of resolution. An array of 16 tiny photodiodes...€3.00 - €18.50
-
Heading Board (discontinued)
This board is no longer in production, see the Compass Board for a high performanc 3-axis / single-port alternative. The Heading Board is a small board containing the HDPM01 compass module by HopeRF. For some reason, there...€2.50 - €17.00
