Skip to navigation.


jeelabs

  • Bare ARM Blinker

    A solderless pathway for exploring the ARM Cortex M0+ ! The Bare ARM Blinker is an entry-level introduction to building neat functions using the 32bit ARM Cortex M0+ chip architecture. Designed as a solderless starter kit for less experienced...

    €9.50 - €23.50

  • Carrier Board (v2)

    The Carrier Board is a re-wiring option which sits between a JeeNode and its plugs. It has exactly the right size to fit snugly in a compact ABS plastic box, made from two identical, standard depth half-shells...

    €4.50 - €12.00

  • Extension cables

    These 6-wire extension cables were custom-made to make it easier to hook up plugs to ports (and to each other). The color codes were chosen to match the port header pinouts: PWR = RED DIO...

    €7.50

  • Flash Board

    The Flash Board is a small PCB which sits on top of a JeeNode or SMD Kit, turning it into an ISP programmer for ATmega and ATtiny chips. The board includes an 128 Kbyte EEPROM,...

    €3.00 - €14.00

  • Garage Parking Aid

    More from the Bare ARM series of solderless projects - the Garage Parking Aid. This kit tracks the Garage Parking Aid ARM Cortex M0+ project documented in the JeeLabs weblog. The Full GPA Kit contains all the parts needed to...

    €19.50 - €33.50

  • Large breadboard

    These large solder-less breadboards make it easy to try out things hooked up to a JeeNode, and to build up elaborate electrical circuits with many components and ICs, particularly in combination with Wire jumpers. The...

    €7.50

  • Mini breadboard

    These white mini breadboards make it easy to try out things hooked up to a JeeNode, particularly in combination with Wire jumpers. The boards have a self-adhesive backing and 2x 17 rows of interconnected pins...

    €4.00

  • Plug Headers

    The Plug Headers set contains ten 6-pin female 0.1" pin headers and ten 6-pin male 0.1" pin headers. These headers are used everywhere by JeeNodes and Plugs, as well as for the FTDI and PWR/SER/I2C connectors....

    €6.00

  • Proto Board

    The Proto Board is a small add-on board which fits over all the connectors of a JeeNode (except the FTDI connector). The two “ends” of the board are slightly different to help identify the proper...

    €3.50 - €30.00

  • Right-Angled Plug Headers

    This Plug Headers set contains ten 6-pin female 0.1" pin headers and ten 6-pin male 0.1" pin headers with the shorter legs conveniently pre-formed into a 90 degree bend. These headers are used everywhere by...

    €6.50