Skip to navigation.


add-ons

  • Color Measuring Plug

    The Color Plug is a small board containing the TAOS TCS3414 digital light color sensor.  This chip measures the color chromaticity and illuminance of ambient light with up to 16-bits of resolution. An array of 16 tiny photodiodes...

    €3.00 - €18.50

  • Compass Board

    The Compass Board is a small board containing the HMC5883 3-axis compass module by Honewell. The chip can be configured to 8 different sensitivities, from 0.9 to 8 Gauss full-scale, with read-outs up to 160 times...

    €12.50

  • Current Transformer (Clip-on)

    This is a quality clip-on current transformer, suitable for the Parasitic Mains Current Sense project, described in the extensive JeeLabs Weblog series as the Micro Power Snitch (MPS). The device is well insulated from the mains potential in...

    €9.50 - €10.00

  • Gravity (accelerometer) Plug

    The g Plug (or Gravity Plug) is a small board containing a MEMS-based 3-axis accelerometer sensor from Bosch Sensortec. With a high (10 bits) resolution and an adjustable ±2/±4/±8g range (i.e. up to 64 LSB/g),...

    €2.50 - €18.00

  • Heading Board (discontinued)

    This board is no longer in production, see the Compass Board for a high performanc 3-axis / single-port alternative. The Heading Board is a small board containing the HDPM01 compass module by HopeRF. For some reason, there...

    €2.50 - €17.00

  • Infrared Plug

    The Infrared Plug is a small board which can send and receive modulated infrared signals, as commonly used by many remote controls and appliances around the house. The board uses a CMOS 555-timer chip to...

    €2.50 - €12.50

  • Lux Plug

    The Lux Plug is a small board containing the TSL2561 light intensity sensor. This tiny sensor communicates directly over I2C. There is a “LuxPlug” class in the JeeLib library to interface with this sensor and...

    €2.50 - €11.00

  • Pressure Plug

    The Pressure Plug is a small board containing the BMP085 barometric pressure and temperature sensor. This tiny sensor communicates directly over I2C. Some processing is required to arrive at properly adjusted readings, this is available...

    €2.50 - €18.00

  • RFM12B Board

    The RFM12B Board is a compact breakout board for HopeRF's RFM12B radio module, as featured on all JeeNodes and JeeLinks. If you are looking for an affordable way to add wireless communication to your Arduino...

    €3.50 - €62.50

  • RFM69CW Board

    Here's a neat HopeRF RFM69CW radio module breakout board. An affordable choice to add modern wireless capability to your Arduino (original or compatible). Supporting both 5V and 3.3V power, this matches a whole range of Arduino...

    €3.50 - €115.00

  • Room Board

    The Room Board is a small board with sensors for indoor monitoring of several environmental parameters: temperature – via either an HYT131 or a DS18B20 humidity – via the same HYT131 sensor motion – via...

    €1.50 - €39.00

  • RTC Plug

    The RTC Plug is a small board containing a low power real-time clock with battery backup. It continues to track the time with second by second resolution while the attached node is sleeping (or even powered...

    €2.50 - €8.50

  • Thermo Plug

    The Thermo Plug is a small, versatile board with room for one of three types of temperature sensors, and either a buzzer or a transistor driver for a modest load such as relay, small motor,...

    €3.50 - €39.00