Skip to navigation.


Frontpage

  • JeeNode Zero

    Go Wireless with the new JeeNode Zero - an ARM M0⁺ based board with fully integrated radio opens up great new projects. These compact units have Mecrisp Forth and radio module drivers pre-installed - just connect up and...

    €14.00 - €49.50

  • USB BUB III

    Jeenode Zero ready: The USB BUB-III board is a flexible active USB connector. It uses a branded FT231X chip to convert USB traffic to serial, including important control signals. It appears as a virtual "COM" port...

    €14.00

  • Wind Sensor Rev C

    New: A compact anemometer sensitive enough to detect human breath. Based on the time-proven "hot-wire" method, this technique excels at low to medium wind speed. Great for sensing indoor air movement, where the spinning cup anemometers are ineffective. ...

    €17.50

  • JeeLink (v3c)

    The JeeLink is a fully assembled and ready-to-use USB-type “stick” which plugs directly into a PC, Mac or USB hub. It contains Atmel’s ATmega328p AVR microprocessor, HopeRF’s RFM69CW wireless radio module and a branded FT232R USB interface chip. The...

    €27.50 - €32.50

  • JeeLink Classic

    The JeeLink is a fully assembled and ready-to-use USB-type “stick” which plugs directly into a PC, Mac or USB hub. It contains Atmel’s ATmega328p AVR microprocessor, HopeRF’s RFM12B wireless radio module and a branded FT232R USB interface chip. The...

    €27.50 - €32.50

  • AA Power board

    Get clean 3.3V regulated power from a single AA battery! The AA Power board is a neat board for generating 3.3V from a single AA battery (Alkaline or NiMh), sufficient to power a JeeNode, for...

    €3.50 - €14.50

  • JeeNode(v6)

    Go Wireless with the JeeNode - a compact, Atmel chip board with integrated radio opens up great new projects. Compatible with the Arduino platform you can  program under Windows, MacOS, or Linux using sketches created with the Arduino IDE....

    €5.00 - €159.00

  • JeeNode Micro

    The JeeNode Micro (v3) is the skinny younger brother of the JeeNode - 15 x 47 mm, and just 3.5 mm tall, from using a thin PCB and an extra-flat wireless module. The two ports (not four) of the...

    €3.50 - €119.50

  • Graphics Board

    Display a range of fonts, symbols or graphs dynamically with the Graphics Board. Create a compact assembly that integrates a 64x128 graphic LCD with a JeeNode (or JeeNode USB, or SMD Kit). You can still...

    €5.00 - €25.00

  • Wireless Starter Pack

    This JeeLabs Wireless Starter Pack has everything you need to get started with your own 3-node Wireless Sensor Network. Two nodes are pre-assembled and pre-loaded with demo software so you can be up and running...

    €169.50

  • Wind Sensor Rev P

    No more waiting. New stock is expected into QA this weekend. New: A compact anemometer sensitive enough to detect human breath. A refinement of the popular Wind Sensor Rev C, this design incorporates hardware ambient temperature compensation. An...

    €24.50