Skip to navigation.


Summer Sale 2017

  • AA Power board

    Get clean 3.3V regulated power from a single AA battery! The AA Power board is a neat board for generating 3.3V from a single AA battery (Alkaline or NiMh), sufficient to power a JeeNode, for...

    €3.50 - €14.50

  • Analog Plug

    The Analog Plug is a small board containing the MCP3424 analog-to-digital converter with I2C bus interface. The ADC can take 4…240 samples per second, depending on resolution (12..18 bits). It has 4 differential input channels and supports...

    €3.00 - €13.00

  • ARM Chips

    Economical ARM Cortex M0+ chips for your projects ! The LPC810 is an entry-level 32bit ARM Cortex M0+ architecture chip from NXP. The 8 pin, Dual In-line Package (DIP) is ideal for breadboarding and easy to solder PCB...

    €4.50 - €13.00

  • Bare ARM Blinker

    A solderless pathway for exploring the ARM Cortex M0+ ! The Bare ARM Blinker is an entry-level introduction to building neat functions using the 32bit ARM Cortex M0+ chip architecture. Designed as a solderless starter kit for less experienced...

    €9.50 - €23.50

  • Battery holder

    This lets you use JeeNodes with batteries. Either the 3- or 4-cell unit is fine, the 4-cell provides higher voltage/more mAh capacity. Depending on whether – and how well – sleep mode is implemented in...

    €3.00 - €4.00

  • Blink Plug

    The Blink Plug is a small board with room for two LEDs and two push buttons. A simple software trick can be used to interface to both switches and LEDs using only two I/O pins....

    €3.00 - €4.50

  • Carrier Board (v2)

    The Carrier Board is a re-wiring option which sits between a JeeNode and its plugs. It has exactly the right size to fit snugly in a compact ABS plastic box, made from two identical, standard depth half-shells...

    €4.50 - €12.00

  • Color Measuring Plug

    The Color Plug is a small board containing the TAOS TCS3414 digital light color sensor.  This chip measures the color chromaticity and illuminance of ambient light with up to 16-bits of resolution. An array of 16 tiny photodiodes...

    €3.00 - €18.50

  • Compass Board

    The Compass Board is a small board containing the HMC5883 3-axis compass module by Honewell. The chip can be configured to 8 different sensitivities, from 0.9 to 8 Gauss full-scale, with read-outs up to 160 times...

    €20.00

  • Current Source Plug

    The Current Source Plug is a small board based on the AP8803 chip to provide a constant current to two independent sets of power LEDs of 350 mA or 700 mA. The two I/O pins...

    €3.50 - €19.00

  • Current Transformer (Clip-on)

    This is a quality clip-on current transformer, suitable for the Parasitic Mains Current Sense project, described in the extensive JeeLabs Weblog series as the Micro Power Snitch (MPS). The device is well insulated from the mains potential in...

    €9.50 - €10.00

  • DC Motor Plug

    The DC Motor Plug is a small board containing two H-bridges to drive a single stepper motor or two small DC motors.  The board uses an I2C I/O expander to support the two motor drivers...

    €2.50 - €12.50

  • Dimmer Plug

    The Dimmer Plug is a small board containing the PCA9635 16-channel PWM LED driver. This driver communicates directly over I2C. There is a “DimmerPlug” class in the JeeLib library to interface with this driver, to...

    €2.50 - €12.00

  • Expander Plug

    The Expander Plug is a small board with 8 general-purpose digital I/O lines. Each of the lines can be configured individually as input (with optional 100 kΩ pull-ups) or as output. The 2×6-pin connection carries...

    €3.50 - €6.50

  • Extension cables

    These 6-wire extension cables were custom-made to make it easier to hook up plugs to ports (and to each other). The color codes were chosen to match the port header pinouts: PWR = RED DIO...

    €7.50

  • Garage Parking Aid

    More from the Bare ARM series of solderless projects - the Garage Parking Aid. This kit tracks the Garage Parking Aid ARM Cortex M0+ project documented in the JeeLabs weblog. The Full GPA Kit contains all the parts needed to...

    €19.50 - €33.50

  • Graphics Board

    Display a range of fonts, symbols or graphs dynamically with the Graphics Board. Create a compact assembly that integrates a 64x128 graphic LCD with a JeeNode (or JeeNode USB, or SMD Kit). You can still...

    €5.00 - €25.00

  • Infrared Plug

    The Infrared Plug is a small board which can send and receive modulated infrared signals, as commonly used by many remote controls and appliances around the house. The board uses a CMOS 555-timer chip to...

    €2.50 - €12.50

  • Input Plug

    The Input Plug is a small board containing a CD4067 16-channel analog multiplexer plus a dedicated ATtiny microcontroller to take care of channel selection. It allows you to connect up to 16 analog inputs to...

    €2.50 - €12.00

  • JeePlug Pack

    The JeePlug is a tiny board which can be used for prototyping and to “re-wire” connections between various headers and cables. There are 8 × 10 plated-through holes and pads, all the pads on the...

    €9.00 - €9.50

  • Large breadboard

    These large solder-less breadboards make it easy to try out things hooked up to a JeeNode, and to build up elaborate electrical circuits with many components and ICs, particularly in combination with Wire jumpers. The...

    €7.50

  • LCD Plug

    The LCD Plug is a small board containing an MCP23008 I/O expander which connects to most common 16-pin character LCD displays that use the HD44780 standard. The backlight can be turned off for greatly reduced...

    €3.50 - €25.50

  • Lux Plug

    The Lux Plug is a small board containing the TSL2561 light intensity sensor. This tiny sensor communicates directly over I2C. There is a “LuxPlug” class in the JeeLib library to interface with this sensor and...

    €2.50 - €11.00

  • Memory Plug

    The Memory Plug is a small board with 1 to 4 EEPROM memory chips. With M24M01’s from STMicroelectronics, the board can have up to 512 Kbyte of memory (4x 1 Mbit). An I2C bus running...

    €2.50 - €17.00

  • Mini breadboard

    These white mini breadboards make it easy to try out things hooked up to a JeeNode, particularly in combination with Wire jumpers. The boards have a self-adhesive backing and 2x 17 rows of interconnected pins...

    €4.00

  • MOSFET Plug

    The MOSFET Plug is a small board containing two high-power MOSFETs for switching loads at up to 5A @ 50V (this will require an extra heatsink). For use without heatsink, a maximum currrent of 1...

    €2.50 - €9.50

  • Opto-coupler Plug

    The Opto-coupler Plug is a small board containing a dual opto-coupler. It can be used to detect the presence of low DC voltages (a few dozen volts) and currents (milliamps) without creating a direct electrical connection...

    €3.00 - €8.50

  • Output Plug

    The Output Plug is a small board containing an 8-bit I/O expander plus NPN darlington array. Each pin can sink up to 500 mA @ 50V. Clamping diodes are included, so that relays and small...

    €2.50 - €8.50

  • Plug Shield

    The Plug Shield allows using I2C-based JeePlugs with any Arduino or compatible clone. It acts as interface between the hardware I2C port and the plugs. There is a level converter on board, as well as...

    €4.50 - €14.50

  • Precision RTC Plug

    The Precision RTC Plug is a small (21x35mm) board containing a low power real-time clock with battery backup. It continues to track the time with second by second resolution while the attached node is sleeping or...

    €3.50 - €14.00

  • Pressure Plug

    The Pressure Plug is a small board containing the BMP085 barometric pressure and temperature sensor. This tiny sensor communicates directly over I2C. Some processing is required to arrive at properly adjusted readings, this is available...

    €2.50 - €18.00

  • Project Boxes

    These are sturdy, general purpose ABS plastic boxes. The clam-shell halves of the box match and mate together with a secure click. For flexibility, there are two stock shell sizes and either size may be used to form boxes...

    €4.00 - €5.00

  • Proto Board

    The Proto Board is a small add-on board which fits over all the connectors of a JeeNode (except the FTDI connector). The two “ends” of the board are slightly different to help identify the proper...

    €3.50

  • Proximity Plug

    The Proximity Plug is a small board which uses the MPR084 to support up to 8 capacitive input ("touch") switches. A solder jumper allows using up to two of these plugs on a single port....

    €2.50 - €9.50

  • Relay Plug

    The Relay Plug is a small board containing two miniature relays, rated up to 3A @ 250V (both AC and DC). This plug is designed to switch low voltage, low power lights, motors, fans etc....

    €2.50 - €15.00

  • RFM12B 433 MHz

    The RFM12B radio module by HopeRF is a small wireless radio module for sending and receiving packets on the 433 MHz ISM band using FSK. There are two variants, the -S1 series with a metal can...

    €6.50 - €29.50

  • RFM12B 868 MHz

    The RFM12B radio module by HopeRF is a compact wireless radio module for sending and receiving packets on the 868 MHz ISM band using FSK.  There are two variants, the -S1 series with a metal...

    €5.50 - €29.50

  • RFM12B Board

    The RFM12B Board is a compact breakout board for HopeRF's RFM12B radio module, as featured on all JeeNodes and JeeLinks. If you are looking for an affordable way to add wireless communication to your Arduino...

    €3.50 - €62.50

  • RFM69CW Board

    Here's a neat HopeRF RFM69CW radio module breakout board. An affordable choice to add modern wireless capability to your Arduino (original or compatible). Supporting both 5V and 3.3V power, this matches a whole range of Arduino...

    €3.50 - €115.00

  • RFM69CW Radio

    The more recent RFM69CW radio module by HopeRF is a compact, powerful radio transceiver module for swapping data packets in the 868 MHz ISM band, using standard and enhanced FSK modulation. Great for sub-compact designs; just 4mm...

    €6.50 - €31.50

  • RFM95W / RFM96W Radio

    LoRa™ is here! The innovative RFM95W / RFM96W radio transceiver modules by HopeRF build on the strengths of the RFM69 series by adding support for the LoRa™ PHY modulation method. This spread-spectrum technique can communicate even when signals are buried in the background noise,...

    €9.50 - €19.50

  • RTC Plug

    The RTC Plug is a small board containing a low power real-time clock with battery backup. It continues to track the time with second by second resolution while the attached node is sleeping (or even powered...

    €2.50 - €8.50

  • Slave Plug

    The Slave Plug is a small board containing a dedicated ATtiny85 micro-controller, which can be programmed through SPI. This chip is more limited than an ATmega, but it does have differential ADC with an optional...

    €3.00 - €9.00

  • UART Plug

    The UART Plug contains a hardware serial port with 64-byte buffers for both send and receive. It can support baudrates up to 115200 baud, if the connecting bus can handle this bandwidth. An I2C bus...

    €2.50 - €11.00

  • USB power adapter

    The USB power adapter is a power supply which delivers 5V to power your projects (or any other USB devices, for that matter). This adapter is extremely compact, yet very efficient. It can supply up to...

    €9.50 - €13.50

  • Utility Plug

    The Utility Plug is a small board to interface any of the ports on a JeeNode to an RJ-12 jack. The kit includes the following extra components, to handle a variety of simple interfacing and...

    €3.50 - €14.00